An Electrical Safety Inspection is a routine check of electrical systems in commercial, institutional, or residential buildings. The objective is to detect any potential electrical dangers before they cause injury or death. Safety inspections are performed regularly and continuously to detect any potential electrical dangers. The inspector checks for conditions that may result in electrocution, burning of the pilot light, overloads, and other hazards.
There are many types of electrical inspection: General, Chimney, Flue and Wiring, Distribution, Radiology, Plumbing, and Roofing. General electrical inspections are usually performed on all structures that require electricity. These inspections generally include a visual examination of operating equipment, and testing of electrical loads and outlets. In addition, any obsolete or unsafe equipment is tested and replaced. If there is a concern about any missing connections or wiring, visual inspections are performed.
Electric distribution inspections are usually pre-shift and post-occurrence. During this inspection, we look for conditions that are likely to promote electrocution, such as missing or faulty wiring; exposed earth contacts, corroded hot lines, and exposed hot water pipes. We also inspect for any area of the electric distribution system, where water can become a hazard. If any part of the electric system fails, the inspection team will perform a thorough inspection and repair work, as needed. This inspection protects the electrical system from any damage or shorting out due to cold, hot, or wet conditions. As part of the service, any loose or missing wiring is replaced, and any other work that may need to be done is performed.
A variety of appliances require regular electrical inspections. For example, new machines require that the circuits are inspected before installation. Old appliances may have wiring problems that need to be replaced. The purpose of the electrical inspection is to prevent any accidents that can occur due to faulty wiring.
Building Inspection – There are numerous building codes in each state, depending on which type of appliance you are using. Codes differ with regard to fire escapes, building exit signs, and other features that are important to the safety of a business or home. An electrical inspection will cover the operations of the appliances and ducts used to supply air conditioning, heating, and cooling, as well as the building structure itself. It may also include the electrical system of the facility itself.
As part of the building inspection, the inspectors examine outlets and wiring, and test for compliance. They also check for resistance to electricity, both in open circuit and closed circuit. Resistance testing is used to verify that all the circuits are capable of withstanding the load being placed upon them. In addition to testing, the inspectors also visually inspect the wiring and components. Any changes are noted and investigated. After thoroughly examining all the wiring, and visual inspection of the circuits, the inspectors mark the defects on the wiring so they can be properly corrected before the next inspection.
Commercial Inspections – It is necessary to make sure all commercial buildings are properly maintained. Inspectors for HVAC services perform commercial inspections to make sure that the systems are working correctly. These inspections not only check for wiring and the condition of appliances, but also look at air conditioning and heaters, fire extinguishers, drains, lighting fixtures, locks, sprinklers, and other things. It is important to get commercial electrical inspections from a qualified HVAC service company. Commercial inspections are different than residential ones, because they are much more thorough. HVAC inspectors will look for leaks, missing parts, damage, and anything else that could cause a hazard to someone outside of the building.
Even though you will have your home or business inspected once every year by your local municipality, it is a good idea to get a professional to look over the wiring periodically as well. A qualified HVAC service company should be able to offer you many service options, including wiring. If there is something wrong with your wiring, you will be able to fix it without calling a professional to come out. This can be costly, especially if you need to hire a professional electrician to come out and fix the problem. In the long run, getting a good electrical inspection from a professional company each year is much cheaper than making repairs due to faulty wiring.