Wood Floor Installation – The Basics

wood floor installation

If you’re looking into wood floor installation, there are some different things to consider. Hardwood floors are quite beautiful and can really add some class to any room in your house. However, they can be quite hard to install – sometimes even more difficult than installing a carpet! There are many different kinds of wood floor installation, as well. From easier, low-maintenance installs to complete sound suppression, every day brings something different to your table. When it comes to installing your brand new hardwood floors, you’ll want to bring in an expert to help you out.

One way to avoid headaches is to use the right kind of wood floor installation adhesive. Using the wrong kind of adhesives can cause problems on your wood floors. Some adhesives, especially the cheaper ones, can even strip the finish off of your hardwood. The best kind would be designed for wood floors and has the proper chemical additives to ensure it won’t strip the finish.

Expanding the gap is important when you’re doing a wood floor installation. This is because some types of wood floors can’t be installed flat. If you have a solid floor with a slight slope, installing over a sill could prove difficult. There are two ways to expand the gap: by using double-sided tape or by using expansion screws. While double-sided tape is generally recommended, expansion screws can be used in some circumstances. Ensure you know what kind of installation you have to make sure you choose the best kind for you.

The second step in wood floor installation is to cut a straight, level line down the subfloor’s middle. This is where you will install the screed. The screed should extend from the wall to where the first-floor border begins. If you’re doing an enclosed subfloor, the screed may need to be made flush against the subfloor. For an open-air subfloor, install a straight row of wood diagonally cut to resemble the letter “T.”

The last step in the installation process is moisture control. Moisture is what makes wood turn gray and start to rot. You have several options when it comes to controlling the humidity in your home. You can hire Wood Floor Installation San Antonio to install a moisture barrier professionally, or you can purchase an inexpensive moisture barrier that can be placed on your own. Either way, be sure that you have it in place before you start to seal the hardwood. Even a tiny amount of moisture can create problems when sealing solid wood flooring.

The installation process is much easier if you use wood screws instead of nails. Nails can puncture through the subfloor when they are hammered in and cause buckling. Using wood screws instead allows the wood to be locked into place and prevents it from moving. Wood screws are generally inexpensive and are available at any home improvement store or lumberyard. Once you have the nails, however, you must have a level subfloor so that the next step of installation does not come up against a wall or other obstacle.

When sealing the wood and then installing the hardwood floor, some important steps prevent moisture from seeping in from the outside. To maintain an even layer of insulation, you need to build up the wall and insulation inside using drywall tape. The inside walls of the house will have a higher concentration of moisture than the outside, and you can make the inside wall dry by simply opening the clogs when you spray the tape over the outside of the wall.

As you can see from the above information, installing wood floors is not a difficult process. If you plan well, you will end up with a seamless and beautiful result. In fact, this project may be easier than you realize. With today’s modern tools and techniques, even this process can be done in just a few hours with no problems. The only thing left to do after the installation is to enjoy your brand-new floors!